🌟 Features & Benefits

  Easy to handle product
  Good binding capacity for seed treatments and coatings
  Good dust control
  Compatible with Seedworx color range and finishing powder
  40 CFR compliant

What you can Expect

 Keep treatments on seed to maximize seed treatment performance and optimize yields

 Easy cleaning of equipment after use and between many different production runs

 Wide range of adaptability for seed species

 Minimized use rate

 Exceeds EU requirements of 0.75g/100,000 seeds

 No need for additional messy powder additives

 Meets EPA approved requirements

🎯 Target Seed Use
Stix Lite is aimed at the horticulture and small grain seeded sector. It can be used in conjunction with blends or other mineral fillers, such as talc or lime. It is recommended for the encrusting and pelleting of seed.

📦 Storage and Packing
Store in a clean, dry area at ambient temperature above 41° F and below 86° F (5°C - 30°C). 

Material should be stored in original containers and kept closed when not in use. Shelf life of the product kept under these conditions is expected to be 6 - 12 months.

Stix Lite should be stirred before use as some settling may occur during transport and storage. Once a mix has been prepared it should be used on the same day. 

🎛️ Application Guide
Seedworx Stix Lite can be used in combination with Seedworx Finishing Powder, where over-wetting can occur or where a shiny finish is desired.

For most applications Seedworx Stix Lite should be diluted with water before use.

Typical slurry application rates are shown in the table below.