Seedworx™
Finishing Powders
Ensure quick drying and high quality appearance.
Product Overview
Finishing Powders are Aginnovation’s engineered seed-finishing system, designed for both lab-scale R&D and high-volume production runs.
Our finely milled mineral formulation rapidly absorbs residual moisture after polymer or colorant application, producing a bright, uniform finish on as little as 5 g of horticultural seed or hundreds of kilograms of broad-acre grain—all with production-grade consistency.
These powders integrate seamlessly into existing Seedworx™ polymer and colorant protocols, locking in repeatable drying times, reducing dust during handling, and simplifying cleanup.
Why it stands out for seed treaters
- Fast, uniform drying – accelerates turnaround between batches and minimizes build-up
- Shiny, high-quality appearance – enhances market appeal and ensures premium seed presentation
- Concentrated, easy-dose formulation – delivers precise application rates, low use-rates, and effortless equipment cleaning
- Wide seed compatibility – optimized for everything from small grains and specialty crops to large-acre cereals
Whether you’re scaling recipes from the bench to the production floor or aiming to boost planter performance in the field, our finishing powders deliver reliable, high-throughput seed enhancement that meets EPA-approved safety standards.
🌟 Features & Benefits
Quick drying of seeds after treatment
Shiny finish
Compatible with Seedworx product line
Compatible with Seedworx colorant line
What you can Expect
Can be used both as a finishing powder and for pelleting and encrusting
Easy cleaning of equipment after use
Enhanced seed flow through handling and within seed plant environment
Minimization of use rate due to concentrated formulation
Ease of cleaning equipment after use
Meets EPA approved requirements
🎯 Target Use
- Seed treatments and build-ups
- Large volume agricultural sector
- Horticultural and small grain seed sector
- Can be used on a wide variety of different seed types
📦 Storage and Packing
We recommend storage in a clean, dry area at ambient temperature, above 41° F and below 86° F (5°C - 30°C).
Material should be stored in original containers and kept closed when not in use.
Shelf life of the product kept under the noted conditions is expected to be 36 months.
🎛️ Application Guide
Seedworx finishing powders can be applied to wet seed, and it is advised to use a polymer/binder to hold the product onto the seed once it is dry.
Seedworx finishing powders can be used in combination with the Seedworx polymer line to aid in dust reduction, as well as the Seedworx colorant line to result in bright, shiny seeds.
Typical application rates are shown in the table below.
Application Rates
This table is purely guidance, and any mixes should be tested in small batches before large scale application. Once a mix has been prepared it should be used on the same day. Storage of mixtures is not recommended. Consult Aginnovation for additional mixing and application guidance if you have questions.
Seed Type | Finishing Powders | Encrusting/Pelleting |
Soybean | 0.20 | Custom |
Corn | 1.00 | Custom |
Other Crops | Call for specific details | Custom |
Product Summary
Binding Capacity
None
Opacity
High
Finish
Sparkle / Shine
Flow Rating
Medium
Dust Control
No
Colors
White or Silver
Physical Properties: FP-160
Form
Dry Powder
Particle Size
10-60 micron
Color
White Shine
Density
0.1-0.3 g/cc
Solubility
Dispersible in water
Physical Properties: FP-170
Form
Dry Powder
Particle Size
74 micron
Color
White
Density
0.45 g/cc
Solubility
Negligible in water
Physical Properties: FP-180
Form
Dry Powder
Particle Size
10-60 micron
Color
Silver Shine
Density
0.1-0.3 g/cc
Solubility
Dispersible in water
The information given is believed to be accurate and is given in good faith, but no representation or warranty as to its completeness or accuracy is made.