Seedworx™ 
Ag C 
High Performing Seed Filmcoating Polymer


PDF Version Download



Product Overview

🌟 Features & Benefits

  Good binding capacity for seed treatments and coatings
  Excellent holding power
  Very good dust control
  Compatible with Seedworx color range
  Compatible with Seedworx finishing powders
  Concentrated formulation
  40 CFR compliant

What you can Expect

 Keep treatments on seed to maximize seed treatment performance and optimize yields

 Reduced worker exposure

 Exceeds EU requirements of 75g/100,000 seeds

 Wide range of adaptability for seed species

 Minimized use rate

 Easy cleaning of equipment after use

 Ease of cleaning equipment after use Meets EPA approved requirements

🎯 Target Seed Use
Ag C is aimed at the large seeded agricultural and vegetable sector. It's primary use is for seed treatment. When suitably diluted it can be used as a final over coating.

📦 Storage and Packing
Store in a clean, dry area at ambient temperature above 41° F and below 86° F (5°C - 30°C). 


Material should be stored in original containers and kept closed when not in use. Shelf life of the product kept under these conditions is expected to be 6-12 months.

Once a mix has ben prepared it should be used on the same day.

🎛️ Application Guide
For most applications Seedworx Ag C should be diluted with water before use. Typical slurry application rates are shown in the table below.

Application Rates

 This table is purely guidance, and any mixes should be tested in small batches before large scale application. Once a mix has been prepared it should be used on the same day. Storage of mixtures is not recommended. Consult Aginnovation for additional mixing and application guidance if you have questions.


Seed Type

Lower Rate
(Fl. Oz/cwt Seed)

Medium Rate
(Fl. Oz/cwt Seed)

High Rate
(Fl. Oz/cwt Seed)

All Types

1.0 - 1.5 oz/cwt seed

1.5 - 2.5 oz/cwt seed

2.5 - 3.5 oz/cwt seed

Product Summary

Use as Encrustment?

Yes

Use as Filmcoat?

Yes

Use for Pelleting?

Yes

Binding Capacity

Medium - High

Opacity

Low

Finish

N/A

Flow Rating

N/A

Dust Control

High

Colors

Neutral

Physical Properties

Viscosity

Pourable Liquid

Form

Liquid Viscous Concentrate

pH

6.5 - 7.5

Solubility

Miscible with water

Colors

Neutral off-white, clear on drying

The information given is believed to be accurate and is given in good faith, but no representation or warranty as to its completeness or accuracy is made.